-
Description
The RP2040-LCD is a development board based on the Raspberry Pi RP2040 and inspired by the Raspberry Pi Pico, with an 0.96" IPS LCD display, USB-C connection, onboard LiPo battery charging and pre-soldered headers!
Using the same GPIO pinout as the Raspberry Pi Pico, the same environment/SDK and a similar board shape and size, the RP2040-LCD offers users additional features in the familiar Pico format, including:
- 0.96" IPS LCD display
- USB-C Connector (with 1800mA regulator)
- Battery recharge circuit and header for 3.7V LiPo batteries
- Pre-soldered headers
- 2MB onboard Flash memory
- Reset button
The board also includes reset/boot buttons and flat debug pads. Your existing Raspberry Pi Pico add-on boards are pin-compatible and can be used with the same libraries and software - use it just like you would a Raspberry Pi Pico!
We are currently only stocking the pre-soldered version, removing the need to solder pin headers yourself. Don't forget to grab a USB-C cable!
Features
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- USB-C connector
- 0.96" 160×80 pixels 65K colorful IPS LCD display
- Lithium battery recharge/discharge header, suitable for mobile devices
- Onboard DC-DC chip TPS63000, high-efficiency DC-DC buck-boost chip, 1.8A current switch
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
- Dimensions: 51mm x 21mm
What's Onboard?
1) USB Type-C connector
2) BOOT button
- Press to reset and enter download mode
3) RESET button
4) 0.96" IPS LCD display
- 160 × 80 pixels, 65K colorful
5) Battery header
- MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
6) TPS63000
- High-efficiency DC-DC buck-boost chip
7) ETA6096
- High-efficiency Lithium battery recharge manager
8) RP2040
- Dual-core processor, up to 133MHz operating frequency
9) W25Q16JVUXIQ
- 2MB NOR-Flash
10) DEBUG points
11) Pinout
- Compatible with Raspberry Pi Pico
Package Contents
- 1x RP2040-LCD board (with soldered headers)
Resources
Pinout
