-
Description
Need a high-quality power brick to run your Raspberry Pi DigiAMP+? We've got one for you! This 65W Power Brick is able to offer a nice stable 19V @ 3.4A, so it's the AMP's perfect companion!
- Voltage - Output 19V
- Current - Output (Max) 3.4A
- Power (Watts) 65W
- Connector: Barrel Plug 2.5mm I.D. x 5.5mm O.D. x 11.0mm (Centre Positive)
Please note: This power brick does not come with an IEC cable. You will need to purchase one separately here (or "borrow" the one from your kettle) to use it!
Specification
- Input
- IEC 320-C14 "Kettle" Lead (Not Included!)
- Voltage: 90 - 264 VAC
- Frequency: 47-63 Hz
- Earth Leakage Current: <0.7mA at 240 VAC/50 Hz
- Output
- Connector: Barrel Plug 2.5mm I.D. x 5.5mm O.D. x 11.0mm (Centre Positive)
- Voltage: 19V
- Current: 3.4A
- Inital Set Accuracy: ±5% at 50% load
- Minimum Load: No minimum load required
- Hold Up Time: 8ms min at 115 VAC, full load
- General
- Operating Temperature -10°C ~ 60°C
- Efficiency: 88%
- Energy Efficiency: Level V
- Isolation: 3000 VAC Input to Output, 1500 VAC Input to Ground. Negative Output is connected to Ground.
- Switching Frequency: 65 kHz ±10 kHz
- Environment
- Operating Temperature: -10 deg C to +60 deg C derate linearly from 100% load at +40 deg C to 50% load at +60 deg C
- Storage Temperature: -20 deg C to +85 deg C
- Operating Humidity: 5% to 90% RH non-condensing
- Storage Humidity: 5% to 95% RH non-condensing
You May Also Like
