-
Description
The Olimex ESP32-S3-DevKit-LiPo is a development board with an ESP32-S3 at its core, a separate USB-C USB JTAG/Debugger and LiPo charger with automatic power supply switching (amongst other features - see the full list below!).
A USB-C cable is not included - be sure to grab one here!
Please note this board's pins are wide - you'll need to straddle two breadboards clicked together to access the pins with jumper wires.
ESP32-S3 Onboard!
The ESP32-S3 is a dual-core XTensa LX7 MCU, capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it also comes with integrated 2.4 GHz, 802.11 b/g/n Wi-Fi and Bluetooth 5 (LE) connectivity that provides long-range support. It has 45 programmable GPIOs and supports a rich set of peripherals. ESP32-S3 supports larger, high-speed octal SPI flash, and PSRAM with configurable data and instruction cache.
We now stock two variants of this board:
- Onboard PCB antenna = ESP32-S3-DevKit-Lipo (SKU 105634)
- External antenna via U.FL = ESP32-S3-DevKit-Lipo-EA (SKU 106011)
Features
- ESP32-S3-WROOM-1-N8R8
- 8MB RAM
- 8MB Flash
- LiPo charger
- LiPo battery connector
- USB-C power supply and USB-Serial programmer
- USB-C OTG JTAG/Serial connector
- Green Status LED
- Yellow Charge LED
- UEXT connector (pUEXT 1.0 mm step connector)
- USB-C power supply and USB-Serial programmer
- USB-C OTG JTAG/Serial connector
- External power sense
- Battery measurement
- Automatic power supply switch between USB and LiPo
- RESET button
- USER button
- Dimensions 56x28 mm
Resources
- User manual
- ESP32-S3-DevKit-Lipo Linux image
- ESP32-S3-DevKit-LiPo Linux build instructions from jcmvbkbc and here
- ESP32-S3-DevKit-Lipo Linux build instructions form ESP32DE
- Schematic
- KiCAD Resources
- CE
- UKCA
Package Contents
- 1x ESP32-S3-DevKit-Lipo board
- The external antenna version comes with a U.FL cable and antenna
