ESP32-S3 Development Board with 4.3" Capacitive Touch LCD Display (800 x 480)

This ESP32-S3 development board is built around the Xtensa 32-bit LX7 dual-core processor, capable of running at speeds up to 240MHz, making it ideal for a wide range of projects. With support for 2.4GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 (LE), and an onboard antenna, this board provides strong wireless communication for your projects.

The board comes with 512KB SRAM, 384KB ROM, 16MB of Flash, and 8MB of PSRAM, offering ample memory and storage using an SD card for trickier projects. It also has a 4.3" capacitive touch display with an 800 x 480 resolution, capable of displaying 65K colours and supporting up to 5-point multi-touch control via an I2C interface. This display is ideal for creating interactive GUI programs, such as those built with LVGL, and has a wide 160° viewing angle for an improved watching experience.

Designed for quick development of Human-Machine Interfaces (HMI) and other ESP32-S3 applications, this board also includes various peripheral connectors, allowing you to easily integrate additional components and expand functionality. Whether you're working on IoT projects, smart devices, or interactive displays, this development board offers the tools to help you create many different projects.

Note: If you would like a case for the board, then choose the case option before adding it to the cart

Features

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
4.3" capacitive touch display, 800×480 resolution, 65K color
Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
Voltage regulator, supports 7~36V wide range power supply
RTC chip and rechargeable battery to ensure time data is not lost when power loss
CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.
Supports passive and active digital input, with bi-directional optocoupler isolation
Supports digital output with optocoupler isolation, and provides higher driving capability with up to 450mA sinking current
LED indicators for indicating the power and battery recharging status
Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

What's on Board

ESP32-S3-WROOM-1-N16R8
The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash
SD Card Slot
USB Type-C port
BOOT button
Press and hold while powering on for program burning
RESET button
Optocoupler isolation
Touch panel connector
4.3" display panel connector
RS485 and CAN terminal resistors selection
close by default
Battery power supply ON/OFF
3.7V single lithium battery GH1.25 header
Status Indicators
DONE: Lithium battery charging completed indicator
CHG: Lithium battery charging indicator
PWR: Power supply indicator
(the CHG will blink and DONE will light on when connecting with the DC power supply and without the lithium battery connected or the battery switch is OFF)
7-36V DC power supply terminal
I2C interface terminal
VOUT pin output 5V/3.3V (switching by an onboard resistor)
CAN interface terminal
RS485 interface terminal
Digital output
5~36V, open-drain output, output load: 450mA per channel (MAX)
Input signal common terminal
NC: dry contact passive input
Connect to power supply positive: digital input low active, for NPN wet contact active input, 5V-36V DC
Connect to the power supply negative: digital input high active, for PNP dry contact active input, 5V-36V DC
Digital input
5~36V supports passive/active input (NPN or PNP)