-
Description
The DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque, improved stability and good durability.
Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 180°servo will never let you down when you need it. Tested with high load capacity for 12 hours long, this DSS-M15 servo demonstrates a maximum torque of 18Kg without much vibration or heat.
In addition, we enclose carefully selected steering parts, including an aluminium alloy wheel and a long bracket to enhance servo performance.
Specification
| Operating voltage | 4.8-7.2V | |
| Test Environment | 6 volts | 7.2 volts |
| Operating speed (without payload) | 0.18 sec/60° | 0.16 sec/60° |
| Quiescent current | 80 mA | 100 mA |
| Stall Torque | 13.5 kg*cm | 15 kg*cm |
| Stall Current | 1.8A | 2A |
| Standby mode current | 4 mA | 5 mA |
| Control signal | RC PWM | |
| Pulse width range | 500-2500 us | |
| Neutral position signal | 1500 us | |
| Clockwise rotation | <1500 us | |
| Operating frequency | 50 - 330Hz (Arduino compatible) | |
| Materials of gear | Metal Gear | |
| Limited angle | About 180° | |
| Connector wire gauge | 28 PVC | |
| Wire length | About 320 mm | |
| Horn gear spline | 25T /5.80 | |
| Geared ratio | 310:1 | |
| Dimension | 54.5 X 20 x 47.5 mm | |
Package Contents
- DSS-M15 Servo x1
- Metal round servo horn x1
- X servo horn x1
- long straight servo horn x1
- Straight servo horn x1
- M2*8 self-tapping screw x5
- M2 screw washer x5
- M3*6 screw x1
