-
Description
Looking for a small, full-colour, display for your next project? This little 1.8-inch general-purpose LCD display module, features a resolution of 128x160 pixels, with an embedded controller, and communication via SPI. This is an ideal display for your next Arduino, Adafruit HUZZAH, or Raspberry Pi project.
Features
- SPI interface requires minimum GPIO for controlling
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
- Driver: ST7735S
- Interface: SPI
- Display color: RGB, 65K color
- Resolution: 128x160
- Backlight: LED
- Operating voltage: 3.3V
Resources
Package Contents
- 1x 1.8" LCD Module
- 1x PH2.0 20cm 8-Pin
Dimensions
Interface
- VCC: Power (3.3V input)
- GND: Ground
- DIN: SPI data input
- CLK: SPI clock input
- CS: Chip selection, low active
- DC: Data/Command selection (high for data, low for command)
- RST: Reset, low active
- BL: Backlight
